Ratchet Assembly Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations ( article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective.
Winch Strap Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations ( article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective. Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity. Auto Transport Tie Down Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations (article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective. Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity. Logistic Straps Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations ( article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective. Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity.
Our hand power pullers are selected from a premium manufacturer. Featuring a double locking and double pawl design in the heavy duty line up with capacities ranging from 1 ton to 4 tons. Heavy duty stamped steel, double safety release, and 1 piece frame construction are found in our hand power pullers. Cable widths are available in 5mm to 6mm thicknesses or for furniture moving ,a webbing fed unit is available for non-scratch purpose. Caution: make sure your Hand Power Puller is maintained in safe and proper working condition by observing the following rules:
Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity.
Motorcycle/ATV Tie Down Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity. Promotional value packs offer a more eye catching design for customers. Used primarily for light duty jobs around the house, outdoor sports, and workplace. Capacity ranges from 1000 lbs to 2300 lbs which should provide ample head room to handle the job and are conveniently packaged with 2 to 4 pieces per item. Quick release cam buckles are available as well as higher capacity, easy grip, ratchet buckles. End fittings come in rubber coated S hooks or J hooks to suit your needs and minimize damage to anchor points. Colors are available in red, blue, neon green, grey, and camouflage style. Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations (article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective. Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity.
Our 1 Inch Tie Down is used primarily for light duty jobs around the house and workplace. Capacity ranges from 700 lbs to 3000 lbs and are available in either cam buckle form or ratchet buckle. 1 inch straps are made from high quality, strength tested polyester for maximum durability. Our 1 Inch Tie Down come shrink wrapped or plastic clamshell packaging. Colors are available in red or blue. Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations (article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective. Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity.
Cargo nets can be used to secure your truck load during transit. Net sizes range from 15”x15” to 12’x12’ and comes in bungee or 1” heavy duty webbing form. Five different styles are available from our 4-arm spider net to the 36”x48” cargo net with 12 hooks. For heavy duty loads, the 12’x12’ 1” webbing cargo net has a rated capacity of up to 2000 lbs. Don’t risk losing your cargo on the road without a cargo net or tie down. Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations (article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective. Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity.
Bungee cords are probably the most inexpensive method of securing items during transit for light loads. Our bungee cords are made from premium rubber. Please be aware that bungee cords are meant for light duty applications only such as securing bikes to a rack, holding down cargo on the roof of your vehicle, or holding your trunk down when transporting oversized items. Hooks are available in plastic or metal. Bungee cord kits provide you with an assortment of different cord lengths to accommodate different requirements. Cords are available in 8mm, 9mm, and 10mm thicknesses. Caution: Please remove bungee cords with care as they are under stress when stretched and will snap back to their original form. Always wear eye protection when operating bungee cords.
Tow straps are valuable tools to get out of immobilizing situations. Our tow straps are available in flat loop, reinforced, and 2 ply options. The loop sewn at each end allows the strap to be slipped easily onto a tow hook. Widths range from 2” up to 4” and lengths are available in 8’, 15’, 20’, 25’, and 30’. Custom requests are welcome, just talk to any of our sales representatives to consult your needs and place your order. Caution: Check Safety Working Load limit as stated on this site as well as attached label to ensure the correct number of assembly is used for a given load. Each assembly is only strong as its weakest part so proper inspection prior to use is necessary as any damages may compromise the integrity of the unit. It is your responsibility to review the Federal D.O.T. regulations (article 392.2) regarding the handling and inspection of each component for safety. These units are not designed to or approved for overhead lifting. Never exceed Safety Working Load. Using corner protectors is recommended to protect webbing and cargo. Do not use any webbing or bungee products that show signs of excessive wear, nicks, cuts, abrasions, worn stitching, chemical burns, holes, or hardware is defective. Safety working load: The maximum load a tie-down should be subject to during normal use. Safe working load should not exceed 1/3 of the rated capacity.
Providing an array of accessories to add anchor points to your truck, our pickup truck products, when used in conjunction with our motorcycle/ATV tie downs, can ensure cargo movement is minimized. Our pickup truck products are packaged in a durable plastic clamshell. Simply bolt down the anchor point to a truck’s bed or sidewall to provide an anchor point. Types of anchor points include: fold away rope hook, eye bolt, toggle bolt, stake pocket, ”T” rope hook, cleat rope hook, swivel rope hook, and “J” rope hook.
Ropes |
© 2006 Boxer Tools Inc. All rights reserved.;